Specifications

R
&S
F
S-K40 Measurements & Settings
Software Manual 1161.8209.42 - 04 54
Fig. 19 Marker Menu
From the marker menu it is possible to adjust the marker position, change marker
mode between normal and delta and switch the marker display on and off.
2.5.1 Adjusting Markers
The marker can be adjusted by pressing the marker softkey in the marker softkey menu.
MARKER
The MARKER softkeys displays the Marker pop-up dialog for the appropriate marker (1 to 4).
As soon as an field in the marker pop-up dialog is adjusted then the marker position in
the trace will update, along with the results displayed for the marker.
Remote CALC1:DELT1:STAT
CALC1:DELT1:X
CALC1:DELT1:Y
CALC1:MARK1:STAT
CALC1:MARK1:X
CALC1:MARK1:Y
2.5.2 Marker Mode
The marker mode facility allows markers to be configured either as normnal or delta
markers. Normal markers show and absolute marker position, delta markers show a
marker position result relative to the normal marker 1.