Specifications

R
&S
F
S-K40 Measurements & Settings
Software Manual 1161.8209.42 - 04 42
2.3.2 Signal Settings
The Signal Settings are the general settings concerning the level and frequency of the signal
to be measured.
2.3.2.1 Frequency
Frequency specifies the Center Frequency of the signal to be measured.
Remote SENS:FREQ:CENT 20 GHz
2.3.2.2 Level
Level specifies the expected level of the RF input signal.
Remote POW:RLEV 1
2.3.2.3 Sweep Forward
Sweep Forward is used to determine the sweep direction for the current measurement.
If Sweep Forward is on the measurement will be done from the start offset frequency to
the stop offset frequency.
If Sweep Forward is off the measurement will be done from the stop offset frequency to
the start offset frequency.
Remote SENS:SWEEP:FORW