Specifications

R
&S
F
S-K40 General Information
Software Manual 1161.8209.42 - 04 36
Fig. 13 Limit Line data view (for an existing limit line)
Once the limit line data has been modified as required, press the SAVE softkey to save
the changes. Pressing the ESC hardkey will display a prompt requesting whether the
changes to the limit line data should be stored or not. Select the appropriate response
with the cursor keys or scroll key and hit ENTER or press the rollkey to perform the
selected action.
1.9.4 Deleting Limit Lines
Existing limit lines can be deleted by pressing the DELETE softkey from the limit line
selection softkey menu
DELETE
The DELETE softkey allows the limit line selected in the limit line selection view to be
deleted.
1.9.5 Enabling / disabling Limit Lines
Limit lines can be enabled and disabled. When a limit line is enabled it will be
displayed in the relevant results graph, and limit checking will be performed. When a
limit line is disabled it will not be displayed and no limit checking for this line will be
performed.