Specifications

R
&S
F
S-K40 General Information
Software Manual 1161.8209.42 - 04 28
Selection of setting using mouse
 When the parameter is selected and ready for editing, select a new setting using
the mouse by left-clicking on the new setting from the drop-down list. The new
setting of the parameter is set immediately.
Selection of setting using external keyboard
1. Select setting using cursor keys.
2. Press ENTER to set the parameter to the new value.
1.6.6.7 Entry of a checkbox
A checkbox is used for parameter settings that are either On or Off (Boolean settings).
A checkmark () appears in the box when the setting is On; the checkbox is empty
when the setting is Off.
Once a parameter has been selected (see above), a new value for a Boolean
parameter can be entered in a number of ways. Because Boolean parameters are very
simple, it is not necessary to press the ENTER key on the numeric keypad or to press
the rollkey in order to edit them.
Toggle between the two states of a checkbox using rollkey
P Press the rollkey to toggle between the two states.
Example: Turn Verify Freequency & Level setting to Off
ENTER
OK
press
The checkbox is empty when the settings is Off
Toggle between the two states of a checkbox using numeric keypad
P Press the ENTER key to toggle between the two states.
Example: Turn Auto Level setting to On
ENTER
OK
Toggle between the two states of a checkbox using a mouse
P Left-click on the checkbox to toggle between the two states.