Specifications

R
&S
F
S-K40 General Information
Software Manual 1161.8209.42 - 04 24
Selection using cursor keys
1. Cursor
, , or until obtaining the required parameter.
Within a list of parameters, the Down and Right both move to the next item (down)
in the list and the Up and Left keys both move to the previous item (up) in the list.
Within a table of parameters, the cursor keys move the cursor in the direction
i
ndicated.
2. To start editing the parameter, either press the ENTER key on the numeric keypad,
or press the rollkey.
3. For numeric parameters, editing can also be started by entering the new value
directly from the numeric keypad without pressing the ENTER key first.
Example: Selecting X-Axis Start
E
NTER
OK
X Axis Start 1 KHz
X
Axis Start
1
KHz
30 KHz
10 KHz
100 KHz
3 KHz
.When ENTER is pressed, a drop-down menu is
displayed, which contains all the
available settings to which the Demodulator parameter can be set.
Selection using mouse
1. Use the mouse to move the cursor to the parameter and press the left mouse
button to select the parameter.
2. To start editing the parameter, either press the ENTER key on the numeric keypad,
or press the rollkey.
For numeric parameters, editing can also be started by entering the new value
directly from the numeric keypad without pressing the ENTER key first.
Selection using external keyboard
1. Select parameter using the cursor keys (in the same way as using the cursor keys
on the front panel).
2. To start editing the parameter, either press the ENTER key on the numeric keypad,
or press the rollkey.
For numeric parameters, editing can also be started by entering the new value
directly from the numeric keypad without pressing the ENTER key first.