Specifications

R
&S
F
S-K40 General Information
Software Manual 1161.8209.42 - 04 19
K40option.
PRESET
Hardkey
When the PRESET hardkey is pressed the R&S FS-K40option is exited and a preset will
be performed. Note that all options shall also be preset.
HCOPY Hardkey When the HCOPY hardkey is pressed the print manager softkey menu is displayed,
allowing selection of the items to be printed.
1.6.4 External Keyboard
The external keyboard is optional. The keys on the external keyboard that can be used
to interact with the R&S FS-K40 option are as follows:
Number keys 0 to 9
Decimal point (“.”) Inserts a decimal point “.” at the cursor position.
Minus key (“-“) Changes the sign of the mantissa or exponent of a numeric parameter. A “-“ is
inserted at the cursor position in the case of an alphanumeric parameter.
ESC key Aborts the entry before it has been terminated. The previous value is restored.
Closes the entry field after termination of input.
Closes pop-up dialogs.
ENTER key Terminates the input of dimension quantities. The new value is set.
Invokes the input of parameters or immediately sets the new value.
Selects the highlighted item in drop-down menus.
Left and Right Cursor
Keys are used to:
Navigate between individual parameters within the setting views and some of the
pop-up dialogs.
Navigate between the individual items within drop-down menus.
Move the cursor left & right inside the entry window to reach a particular position in
the string during alphanumeric entry.
Up and Down Cursor
keys are used to:
Navigate between individual parameters within the setting views and some of the
pop-up dialogs.
Navigate between the individual items within drop-down menus.
Increment or decrement the value of a parameter during numeric entry.
CTRL keys Used to activate hotkeys. Each of the seven hotkeys is allocated a different function
(F) key. To access these hotkeys press CTRL and the corresponding F key together
(see Fig. 1):
Fig. 1 Quick Access to Hotkeys
Function Keys
Used to activate softkeys. Each of the nine softkeys is allocated a different function (F)
key. To access these softkeys the corresponding F key, as shown below: