Specifications

R
&S
F
S-K40 General Information
Software Manual 1161.8209.42 - 04 12
2. Press the GENERAL SETTINGS softkey to open the General Settings view.
3. Select the Frequency field and enter the desired frequency to measure.
4. Select the Level field and enter the level of the input signal.
5. Select the Verify Frequency & Level field and ensure the check box is switched off.
The setting of this field can be changed by pressing the ENTER key or pressing
the roll-key.
All other settings in this view are sufficient for this example.
6. Press the MEAS SETTINGS softkey to open the Measurement Settings view