Specifications

R
&S
F
S-K40 General Information
Software Manual 1161.8209.42 - 04 11
1.3 Starting the application
Power up the R&S spectrum analyzer. When R&S FS-K40 is correctly installed there
will be a hotkey labelled PH NOISE at the bottom of the screen. Press the PH NOISE
hotkey to start R&S FS-K40.
Note that if the spectrum analyzer is powered down whilst R&S FS-K40 is active, then when
the spectrum analyzer is powered up again it will start up in the R&S FS-K40 application.
1.4 Exiting the application
To exit the R&S FS-K40 option, press the SPECTRUM hotkey at the bottom of the
screen. This will cause the option to exit and the spectrum analyzer to be activated.
1.5 Quick Start Guide
This section helps the user to quickly become familiar with R&S FS-K40 by working step-by-
step through an ordinary measurement. (Refer to section 2 for a detailed reference guide.)
1.5.1 Setting up the measurement
1. Start the R&S FS-K40 application.