Specifications

R
&S
F
S-K40 Remote Control
Software Manual 1161.8209.42 - 04 98
STATus:QUEStionable:POWer:PTRansition 0 to 65535
This command determines what bits in the STATus:QUEStionable:POWer Condition
register will set the corresponding bit in the STATus:QUEStionable:POWer Event
register when that bit has a positive transition (0 to 1).The variable <number> is the sum
of the decimal values of the bits that are to be enabled.
E
xample
STAT:QUES:POW:PTR 65535
'All condition bits will be summarised in the Event register
when a positive transition occurs.
Characteristics
*RST value: 65535
SCPI: device-specific
STATus:QUEStionable:POWer:NTRansition 0 to 65535
This command determines what bits in the STATus:QUEStionable:POWer Condition will
set the corresponding bit in the STATus:QUEStionable:POWer Event register when that
bit has a negative transition (1 to 0).The variable <number> is the sum of the decimal
values of the bits that are to be enabled.
Example
STAT:QUES:POW:NTR 65535
'All condition bits will be summarised in the Event register
when a positive transition occurs.
Characteristic
*RST value: 0
SCPI: device-specific
STATus:QUEStionable:POWer[:EVENt]?
This command queries the contents of the EVENt section of the
STATus:QUEStionable:POWer Register. Readout deletes the contents of the
EVENt section.
Example
STAT:QUES:POW?
Characteristics
*RST value: 0
SCPI: device-specific