Specifications

R
&S
F
S-K40 Remote Control
Software Manual 1161.8209.42 - 04 96
STATus:QUEStionable:PNOise:CONDition?
This command queries the contents of the CONDition section of the
STATus:QUEStionable:PNOIse register. Readout does not delete the contents of
the CONDition section.
Example
STAT:QUES:PNOI:COND?
Characteristics
*RST value: 0
SCPI: conforming
STATus:QUEStionable:PNOise:ENABle 0 to 65535
This command sets the bits of the ENABle section of the
STATus:QUEStionable:PNOIse register. The ENABle register selectively enables
the individual events of the associated EVENt section for the summary bit.
Example
STAT:QUES:PNOI:ENAB 65535
'All events bits will be represented in the PNOIse summary
bit.
Characteristics
*RST value: 65535
SCPI: device-specific
STATus:QUEStionable:PNOise:PTRansition 0 to 65535
This command determines what bits in the STATus:QUEStionable:PNOIse
Condition register will set the corresponding bit in the
STATus:QUEStionable:PNOIse Event register when that bit has a positive
transition (0 to 1).The variable <number> is the sum of the decimal values of the
bits that are to be enabled.
Example
STAT:QUES:PNOi:PTR 65535
'All condition bits will be summarised in the Event register
when a positive transition occurs.
Characteristics
*RST value: 65535
SCPI: device-specific
STATus:QUEStionable:PNOise:NTRansition 0 to 65535
This command determines what bits in the STATus:QUEStionable:PNOIse
Condition will set the corresponding bit in the STATus:QUEStionable:PNOIse
Event register when that bit has a negative transition (1 to 0).The variable