Specifications

R
&S
F
S-K40 Remote Control
Software Manual 1161.8209.42 - 04 95
STATus:QUEStionable:LIMit<1|2>:ENABle 0 to 65535
This command sets the bits of the ENABle section of the
STATus:QUEStionable:LIMit register for screen A and B. The ENABle register
selectively enables the individual events of the associated EVENt section for the
summary bit.
E
xample
STAT:QUES:LIM:ENAB 65535
'All events bits will be represented in the LIMit summary
bit.
Characteristics
*RST value: 65535
SCPI: device-specific
STATus:QUEStionable:LIMit<1|2>:PTRansition 0 to 65535
This command determines what bits in the STATus:QUEStionable:LIMit Condition
register of screen A or B will set the corresponding bit in the
STATus:QUEStionable:LIMit Event register when that bit has a positive transition
(0 to 1).The variable <number> is the sum of the decimal values of the bits that are
to be enabled.
Example
STAT:QUES:LIMit:PTR 65535
'All condition bits will be summarised in the Event register
when a positive transition occurs.
Characteristics
*RST value: 65535
SCPI: device-specific
STATus:QUEStionable:LIMit<1|2>:NTRansition 0 to 65535
This command determines what bits in the STATus:QUEStionable:LIMit Condition
register of screen A or B will set the corresponding bit in the
STATus:QUEStionable:LIMit Event register when that bit has a negative transition
(1 to 0).The variable <number> is the sum of the decimal values of the bits that are
to be enabled.
Example
STAT:QUES:LIM:NTR 65535
'All condition bits will be summarised in the Event register
when a positive transition occurs.
Characteristics
*RST value: 0
SCPI: device-specific