Specifications

R
&S
F
S-K40 Remote Control
Software Manual 1161.8209.42 - 04 87
3.10 INSTrument Subsystem
INSTrument:NSELect <numeric_value>
INSTrument:SELect PNOise
INSTrument:NSELect <numeric_value>
This remote control command selects active operation of the R&S FS-K40 option
by specifying its associated option number.
Example
INST:NSEL 20
'The R&S FS-K40 option will be selected as the active option.
Characteristics
*RST value: 1
SCPI: device-specific
INSTrument:SELect PNOise
This remote control command selects active operation of the R&S FS-K40 option by
specifying its name.
Example
INST:SEL PNO
The R&S FS-K40 option will be selected as the active option.
Characteristics
*RST value: SAN
SCPI: device-specific
3.11 MMEMory Subsystem
MMEMory:STORe<1|2>:TRACe 1 to 3, <file_name>
This command stores the selected trace (1 to 3) in a file with ASCII format. The
decimal separator (decimal point or comma) for floating-point numerals contained
in the file is defined with the command
FORMat:DEXPort:DSEParator
.
The file name includes indication of the path and the drive name. Indication of the
path complies with DOS conventions.
Example
MMEM:STOR:TRAC 3,’A:\TEST.DAT’
’Stores trace 3 in the file ’TEST.DAT’ on a disk.
Characteristic
*RST value: -
SCPI: device-specific
This command is an event and therefore has no *RST value and no query.