Specifications

R
&S
F
S-K40 Remote Control
Software Manual 1161.8209.42 - 04 84
FETCh:PNOise:RPM?
This command returns the measured Residual PM result for the specified trace.
Example
FETC:PNO2:RPM?
'Returns the Residual PM result for Trace2
Characteristics
*RST value: -
SCPI: device-specific
FETCh:PNOise:RMS?
This command returns the measured Residual RMS result for the specified trace.
Example
FETC:PNO3:RMS?
'Returns the Residual RMS result for Trace3
Characteristics
*RST value: -
SCPI: device-specific
3.7 FORMat Subsystem
The FORMat subsystem provide specifies the data format of the data transmitted from
and to the instrument.
FORMat[:DATA] ASCii | REAL
FORMat[:DATA]:DEXPort:DSEParator POINt | COMMa
FORMat[:DATA] ASCii | REAL
This command specifies the data format for the data transmitted to from the instrument
to the control PC.
Example
FORM REAL
'The data requested by the TRACE:DATA? command as floats in
binary format.
Characteristics
*RST value: ASCii
SCPI: Conforming