Specifications

34 DataMan 8000 Quick Reference Guide DataMan 8000 Quick Reference Guide 35
Condition Status Indicator:
Reader
Status Indicator: Base
Station
Sounds
Reader in wire-
less range of
base station
When the reader is
awake, blinking blue
indicates wireless
connection with base.
When the reader is
ofine, no indicator.
Pull the trigger to
wake it up and it will
blink blue.
Good read: green,
single beep (default)
No read: red, no
beep (default)
Reader out of the base
station and reader is
awake: steady blue.
Reader out of the base
station and reader is
ofine: steady red.
Paired reader in the base
station: steady green.
Base station is receiving
data or images from
reader: ashing blue.
Good read: 1 beep (default)
No read: no beep (default)
Reader out of
wireless range
of base station
Ofine: When the
reader wakes up out
of the wireless range,
there is no indicator.
Good read: green
(default)
No read: red (default)
Reader ofine: steady
red.
Long beep when you leave the
wireless range.
Good read: 2 beeps
No read: no beep
Reader out of
wireless range,
buffer is full
Good read: green
and then white
No read: red (default)
Reader ofine: steady
red
Good read: long beep
No read: no beep
Wireless Reader: Charging
blinking red status indicator
indicates low battery
When you are reading codes with your wireless reader, blinking red
status indicators will indicate low battery. As the battery discharges, the
blink frequency increases.
You can also check the status of the battery in the Setup Tool.
Summary of Wireless Buffering Indicators