Specifications
26 DataMan 8000 Quick Reference Guide DataMan 8000 Quick Reference Guide 27
Connecting to a Wireless DataMan 8000 through a Base Station
2. With a 2 mm
Allen Wrench,
tighten the
screws so that
the slide-in is
î‚¿rmly locked.
4. Insert the plug and twist it in place.
1. Connect the
wireless slide-
in (DMCM-
WLESSM-00) to
your DataMan
8000.
5. Power up the base station using either a 24V power supply, or a Class
3 Power Over Ethernet adapter.
6. Connect your base station to your PC using either serial, USB or
Ethernet communication.
Ethernet connection
RS-232 connection
USB connection
3. Insert the battery.
WARNING
Remove battery from your DataMan before inserting/
removing the communication module.
Power
location of the
two screws