Installation guide

3 Logging On
You can control the Super Card either from a local terminal, or over the
X.25 network.
3.1 Locally
A VT100 compatible terminal is required, which is referred to as the
'manager terminal'. It must have the following attributes:
speed: 1200, 2400, 4800, 9600 or 19k2 bps
data bits: 8
parity: none
stop bits: 1
1. Connect the manager terminal to the Super Card diagnostic/manager
port with cable X870-401511 (see Appendix C for details).
2. Enter
<CR>. A prompt message will be displayed. Type 99L and enter
<CR>. A screen will be displayed.
3. At the password prompt, enter
<PF1>. The 8295 top level menu will be
displayed.
X870-300451 Issue 2 3-1 Rev.0