Installation guide

2.4 Other Equipment
Check interfaces between the Super Card and all other equipment which is
to be connected (modems, computers, terminals) to ensure compatibility of
data and control lines. Any changes necessary must be made in the
interconnecting cables.
If the Super Card is being installed in an 8325, it is necessary to have at
least one interconnection between the Super Card and an X.25 SAC port
somewhere in the 8325. If there is one such connection it should be to the
Super Card's composite port (port 0).
The type of cable to be used depends on the type of PIM; however, use of
V.24 for this purpose is not recommended as it limits the data rate to 19.2
kbps.
X870-300451 Issue 2 2-5 Rev.0