Specifications

X723-300151 5-14 Issue 2

The following descriptions of configuration options show the 'Modify' and

'Display' formats for each option.

Port Integrated Menu Support

The 3000 Series provides integrated menu support for some channel cards,

e.g. Dual Nx64 LIU and Dual G.703 DLIU. Refer to the channel card

manuals for the menus provided for all cards except Dual G.703 LIU

which is covered in this manual.

Integrated menu support can be accessed via Modify Port p1 option for a

card fitted in port 1, Modify Port p2 for card fitted in port 2. On selection

of Modify Port p3 and p4 options, the user is given the option to select the

card slot A, B... for each physical port.

If the card fitted in that slot has integrated support, the appropriate

menus will be displayed seemlessly. If the card fitted is not supported in

that slot, the ‘Not available on card fitted or card missing’ message will be

issued.

5.4.3 DLIU Integrated Menu

A Dual G.703 LIU fitted in port 1 and 2 is configured using the following

menu structure. Dual LIU cards fitted in ports 3 and 4 are configured

using the 'Smart' menu option as described in the Dual LIU manual.

Modify Format

This command allows the user to set the operating parameters for ports 1

and 2 when fitted with a Dual LIU card DTE241.

(CCEM) Port | sYnc | Alarms | Cross connect >P

(CCEMP) Assigned cct | Circuit ctl | Smart configs | p1 | p2 | p3 | p4 >1

1) Sync

This will allow the operator to set the parameter for detecting the loss

of the incoming signal when it is used as a synchronising source. This can

be either:-

1 Line Loss

2 Line Loss or Service Loss

3 Line Loss, Service Loss or receipt of a Remote Alarm. (Bit 3 in TS0)

4 Line Loss or receipt of a Remote Alarm

Service Loss is defined as: loss of Frame sync, AIS or a 10

-3

error rate.