Specifications

X723-300151 5-8 Issue 2
5.3.4 Install Menu. E
2
PROM Programming
The operator may select a range of modes of operation using the 'Install'
menu option. This will show the current setting and present each
configurable mode option and allow the operator to change the setting. If
no change is required then pressing the Return/Enter key will skip to the
next item.
(O) Verbose | Brief | Echo | Noecho | Terminal | Install >I
Network letter is P (A - Z excluding N) >
Network number is 63 (1 - 63) >
Control port is local (0=local 1=a 2=b) >
Security is off (0=off 1=on) >
Start-up with echo (0=noecho 1=echo) >
Start-up in verbose (0=brief 1=verbose) >
Start-up fault logging is logging (0=off 1=logging 2=asr) >0
Redundant disabled (0=disabled 1=enabled) >
Expansion disabled (0=disabled 1=enabled) >
Alarm event detect period is 5 (0-60) >
Alarm event hold period is 5 (0-60) >
Alarm event channel card fault level is 16 (1-16) >
Network port A enabled (0=disable 1=enable) >
Network port B enabled (0=disable 1=enable) >
Network enabled (0=disable 1=enable) >
Network CRC Upload enabled (0=disable, 1=enable) >
Network CRC Upload Timer Offset 300 (180 to 720) >
Network C/D Upload enabled (0=disable, 1=enable) >
Network C/D Auto Clear enabled (0=disable, 1=enable) >
PSU A absent (0=absent 1=fitted) >
PSU B absent (0=absent 1=fitted) >
-48v absent (0=absent 1=fitted) >
Manage Port A baud rate is 1200 (600,1200,2400,9600) >
Manage Port B baud rate is 1200 (600,1200,2400,9600) >
Manag Config 1 5 10 14 D
System management 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 >
LIU 1 management1 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 >
LIU 1 management2 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 >
LIU 2 management1 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 >
LIU 2 management2 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 >
Severely errored second limit 805 (1-915) >
In the example above one parameter was changed. At the end of the
options list the operator is then prompted to check if changes are to be
permanently installed.
changes have been made, do you wish to install (Yes No) >Y
Saving installed modes . . . . completed ok!