Specifications

X723-300151 5-5 Issue 2

To set up further timed events, the operator first inserts all of the regular

weekly events giving 0 as the week designator.

To modify a selected week the operator inserts events specifying the

selected week number and normal event data. The inserted event will

then only occur within the given week number and run until the next

week 0 event or another event for that week.

Note: Timed events are intended for multiplexer configuration control in

a stand-alone environment. If the multiplexer is connected to an NCS

then timed events will automatically be disabled, and the network

controller must then be configured if real time events are required.

Creating Timed Events

(T) Display | Set | Events >E

week 1-52 (0=all) >0

day, hour, minute, config >1,12,30,1

day, hour, minute, config >2,12,30,2

day, hour, minute, config >3,12,30,3

day, hour, minute, config >

week 1-52 (0=all) >20

day,hour, minute, config >2,12,30,4

day,hour, minute, config >3,10,30,5

Displaying Timed Events

(T) Display | Set | Events >E

event 1, - week 0, wk.day 1, hour 12, minute 30, configuration 1

event 2, - week 0, wk.day 2, hour 12, minute 30, configuration 2

event 3, - week 0, wk.day 3, hour 12, minute 30, configuration 3

event 4, - week 20, wk.day 2, hour 12, minute 30, configuration 4

event 5, - week 20, wk.day 3, hour 10, minute 30, configuration 5