Specifications

X723-300151 0-6 Issue 2
2.3 Commissioning 2-11
2.3.1 Link and Switch Settings 2-11
2.3.2 Redundant System Control Card 2-12
2.3.3 Switch on Procedures 2-15
2.3.4 Initial Multiplexer Set-up 2-16
2.3.5 Alarm Indicators 2-16
3 Dual Line Interface Unit 3-1
3.1 General 3-1
3.1.1 TS0 'Not Frame Word' Routing 3-1
3.1.2 Clock Recovery and Selection 3-3
3.1.3 Jitter Attenuation 3-3
3.1.4 Frame Structure 3-3
3.1.5 G.703 Clock Output 3-4
3.1.6 Link Settings 3-4
3.1.7 Switch Settings 3-4
3.1.8 LED Indicators 3-4
3.2 Dual LIU Adaptors 3-5
3.2.1 DT315 75 Ohm I/O Adaptor 3-5
3.2.2 DT316 120 Ohm I/O Adaptor 3-6
4 Management Configuration 4-1
4.1 Introduction 4-1
4.2 System Controller Patchfield 4-2
4.3 Dual LIU Patchfield 4-3
4.3.1 Cross-connect Bits 4-3
4.4 Examples of Management Patchfields 4-4
5 Multiplexer Configuration 5-1
5.1 Menu Tree 5-1
5.1.1 Menu Operation 5-1
5.1.2 Root Menu 5-2
5.1.3 Time Menu 5-2
5.1.4 Mode Menu 5-2
5.1.5 Configuration Menu 5-3
5.2 Time Menu 5-4
5.2.1 Time and Date Setting 5-4
5.2.2 Time and Date Display 5-4
5.2.3 Timed Events 5-4