Specifications

X723-300151 6-30 Issue 2
Rx. Atten. Local
The currently active faults have had their relay driving actions inhibited
by the use of the local receive attention command. This command will
originate from the operator menu under the 'faults active' section.
Rx. Atten. Network
The currently active faults have had their relay driving actions (when
enabled on the node) inhibited by the use of the network receive attention
command. This command will originate from the network control unit.
Path A Selected
This fault indicates that Line 1 is active in A/B mode.
Path B Selected
This fault indicates that Line 2 is active in A/B mode.
Circuit Inhibit
Indicates that faults from the relevant circuit have been inhibited.
Alarm Inhibit
This fault indicates that the circuit number given in the fault report has
had all its faults inhibited.