Specifications

X723-300151 6-17 Issue 2
CROSS
CONNECT
SWITCH
CHANNEL
CARD
CIRCUIT LOOP
P3
Timeslot
Loop
Local
PCM
Loop
PCM
PCM
S1
S2
S3
S4
Display Data
Display Signalling
Display Peak Codes
Set Data
Set Signalling
Incoming
PCM
Loop
P4
LIU
Figure 6-1 Position of Loops and Data Test Points
Reconfigure
The 'Reconfigure' option runs the current configuration again. All loops
and data tests will be cleared, and in A/B mode 'path A' will be selected.
(MD) Set | Display | Loops | Reconfigure >R
6.2.5 Running Self Test
Commands are provided to initiate a 10 second (approx) self test. See
Section 2.3.3 for details of the test.
Self Test Menu
Example 1 - Self Test Passed
(M) Current | Data tests | self Test | Alarms | Version | System | typE >T
are you sure (Yes | No) >Y
self test passed