Specifications

X723-300151 6-8 Issue 2
Note 1
Group 5 fault 9 - configuration 1 running. Faults 10 to 22 correspond to
configurations 2 to 14 running. One of the configurations will normally be
running, and this zero level 'fault' is for information only.
Note 2
Group 5 fault 25 - configuration 1 corrupt. Similarly, faults 26 to 38
correspond to configurations 2 to 14.
Note 3
LIU faults from a board fitted to P1 will light LED 2, and not LED 3. LIU
faults fitted to P2 will light LED 3 and not LED 2.
Note 4
Group 8 faults 1, 2 & 3 light either LED2, LED 3, LED 4 or LED 5
depending on the port. Fault 1 will also illuminate LED 8.
Note 5
Management configuration running 1 to 14 raise the corresponding zero
level 'fault' numbers 1 to 14 for information only.
Note 6
Corrupt management configurations 1 to 14 raise fault numbers 17 to 30
respectively.
Note 7
Self test will set relays and LED indicators for a five second period.
Note 8
Group 9 faults 9 to 24 are:
9 = Module 1 status 1 17 = Module 1 status 3
10 = Module 2 status 1 18 = Module 2 status 3
11 = Module 3 status 1 19 = Module 3 status 3
12 = Module 4 status 1 20 = Module 4 status 3
13 = Module 1 status 2 21 = Module 1 status 4
14 = Module 2 status 2 22 = Module 2 status 4
15 = Module 3 status 2 23 = Module 3 status 4
16 = Module 4 status 2 24 = Module 4 status 4
Note 9
Signalling F codes are not set when in A/B mode.