Specifications

X723-300151 5-38 Issue 2
The default configuration field has been set in the following manner:
1 P1 and P2 (Line 1 and Line 2)
Sync: Line loss
Fcode: FFH
Bypass: Disabled
Mode: Terminal
Error: 10
-5
CRC4: Disabled
Alarm: Line loss
Ts Assign: No timeslots allocated
2 Sync source
Failure recovery mode: Automatic
Automatic recovery delay: 1 second
Source selection: Freerun
3 Channel alarm events
All unassigned
Alarm events disabled
4 Circuit assignments
No timeslots assigned to channel cards.
TS control: 00000000B
5 Circuit controls
control 1: 11111011B
control 2: 11111111B
6 Smart configurations
All smart channel cards running config No. 1
7 Fcode table
All data: FFH
All signalling: FH
8 Cross connect channel assignment
All timeslots: Fixed data, Fcode 1