Specifications

X723-300151 5-37 Issue 2
Installing all Cards
(CE) List | Install | install All | Remove | iDent >A
P1,A, DT310 installed
P2,A, none installed
P3,A, DT310 installed
P3,B, none installed
P3,C, none installed
P3,D, DT575 installed
P3,E, none installed
P3,F, none installed
P4,A, none installed
P4,B, none installed
P4,C, none installed
P4,D, none installed
P4,E, DT579 installed
(CE) List | Install | install All | Remove | iDent
*
>
Removing a Card
(CE) List | Install | install All | Remove | iDent >R
select port, card >P3, A
DT310 removed
(CE) List | Install | install All | Remove | iDent
*
>
Identifying a Fitted Card
(CE) List | install All | Remove | iDent >D
select port, card >P3,A
map Dual LIU - CEPT (DT986 Smart)
fitted Dual LIU - CEPT (DT986 Smart)
(CE) List | Install | install All | Remove | iDent
*
>
5.4.18 Default Configuration
The default configuration is a configuration held in ROM which is
available for the operator to load. To create a configuration it is necessary
for the operator to either load an existing valid configuration or the
default field. The operator can then modify the field to suit the required
needs before saving it back into a configuration field.