Installation Guide

180511
Lock Nut (E)
4. Attach the fixture to the mounting plate by inserting fixture mounting screws into holes on back plate, and then
secure it with two ball nuts.
5. Install bulbs (not included). Check relamping label at socket area or packaging for maximum allowed wattage.
Ball Nut (G)
Turn on the power at fuse or circuit box.
A: 8"
B: 11"
C: 5"
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Assembly Kit
5895MM (1 SET)
Mounting Screw (B)
Wire Connector (F)
Green Grounding
Screw (C)
Fixture Mounting
Screw (D)
Mounting Plate (A)