Installation Guide

ManualsBrandsCascadia ManualsBathroom & Wall LightingBozeman 2-Light Bronze Rustic Vanity Light

3. Install the silhouettes onto the back plate.

a. Take a silhouette and place it onto the back plate with the hole in the back plate

aligning the slot in the clip of the silhouette, secure it with a set screw.

(See Figure 3)

b. Repeat with the other silhouettes.

c. Please follow the sequence shown in Figure 2 to install the silhouettes onto the

back plate.

d. You can install the silhouettes which marked V-R (for VL55402) or marked V-D &

V-B4 (for VL55502) or marked V-S (for VL55702) to the location of silhouette which

marked V-E (for VL55602) to replace them. (See Figure 2-a/b/c)

4. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire

connections using the wire nuts:

---Connect the black wire from the fixture to the black wire from the power source.

---Connect the white wire from the fixture to the white wire from the power source.

---Attach the fixture grounding wire to the mounting plate with the green grounding

screw. Then connect it to the house grounding wire with a wire nut.

Carefully put the wires back into the outlet box.

5. Attach the back plate to the mounting plate by inserting the screws, secure it with

two bolt nuts.

6. Attach the glass shades to the glass holders, secure them with the socket rings.

7. Install bulbs (not included). See relamping label at socket area or packaging for

maximum allowed wattage.

8. Turn on the power at the main fuse or circuit breaker box.

Back Plate

"L" Clip

Set Screw

Figure 2

Page 2

V-B3

V-C

V-E

V-C

V-B1

Figure 3

100525

Parts for

VL55502

V-B4

V-D

Figure 2-b

Parts for

VL55402

V-R

Figure 2-a

V-S

Figure 2-c

Parts for

VL55702