Installation Guide

Socket Ring
Glass Shade
Glass Holder
Bolt Nut
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE
NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.
VL35401
Installation Steps
1. Thread two screws to the mounting plate outwards, and then secure with
two lock nuts.(You can adjust the length of the screws if necessary.)
2. Attach the mounting plate to the wall box by using two mounting screws.
3. Make wire connections with wire nuts:
---The black wire from light to the black wire from power source.
---The white wire from light to the white wire from power source.
---Attach the grounding wire and the house grounding wire to the
mounting plate with a green grounding screw.
Carefully tuck wires back into the wall box.
4. Attach the back plate to the mounting plate by inserting the screws, and
then secure with two bolt nuts.
5. Attach the glass shade to the glass holder, and then secure with the socket
ring.
6. Install a bulb. (Please do not exceed the maximum capacity which is
recommended on the package.)
7. Turn on the power at fuse or circuit box.
Mounting Screw
Fixture Wire
Grounding Wire
Lock Nut
Mounting Plate
Housing Grounding Wire
Green Grounding Screw
Back Plate
Wire Nut
Screw
Wall Box