Installation Guide

Mounting Hardware

5164MM(1SET)

Glass Panel

9644CS(6PCS)

The following parts are available for re-order if damaged or missing.

141225

Page 2

A: 12"

B: 4-3/4"

Mounting Strap (A)

Short Screw (B)

Green Grounding

Screw (C)

Wire Nut (E)

Long Screw (D)

Lock Nut (F)

Ball Nut (G)

4. Attach the canopy to the mounting strap: insert the long screws through the two holes, and secure it with two ball nuts.

CAUTION: With silicone caulking compound, caulk completely around where back of canopy meets with the ceiling

surface to prevent water from seeping into the outlet box.

5. Install bulbs (not included). See relamping label at socket area or packaging for maximum allowed wattage.

6. Place the bottom glass panel into the metal frame, and set the six "S" clips on the slot and fix the bottom glass panel

by inserting the side glass panels onto the “S”clips, then press the top clips of the metal frame to secure the side

glass panels. (See Fig 1. / Fig 2. / Fig 3.)

7. Attach the metal frame to the ceiling pan by locationg set screws into the “L” slots, then turn it clockwise until it is locked

in place.

Turn on the power at fuse or circuit box.