Installation Guide

ManualsBrandsCascadia ManualsPendant LightingBembridge Gold Stone Traditional Seeded Glass Lantern Pendant Light

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

T0077

Bulb Type B Max.60W

(not included)

Glass Panel (M)

Clip

Ball Nut Assembly (N)

Nipple-1

Parts:

140328

Metal Frame

Loop

Parts Number (4997MM)

Mounting Strap (A)

Mounting Screw (B)

Green Grounding

Screw (C)

Wire Nut (D)

Canopy (I)

Loop Lock (K)

Chain (L)

Outlet Box

House Grounding Wire

Wire Nut (D)

Fixture Wire

Fixture Grounding Wire

Mounting Strap (A)

Green Grounding Screw (C)

Mounting Screw (B)

Nipple(G)

Canopy (I)

Top Loop (H)

Hex Nut (E)

Washer (F)

Collar (J)

Loop Lock (K)

Chain (L)

Hex Nut (E)

Washer (F)

Nipple(G)

Top Loop (H)

Collar (J)

Parts Number (9563CS)

Glass Panel (M) (X4)

Parts Number (4998SS)

Ball Nut Assembly (N) (X2)

Fig.1

Clip

Glass Panel

Clip

Glass Panel

Dome

WARNING: Turn off the main power at circuit breaker before installing fixture.

AVERTISSEMENT: Coupez la source d’alimentation principale au panneau

central de disjoncteurs avant d’installer le luminaire.

Summary of content (2 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS T0077 WARNING: Turn off the main power at circuit breaker before installing fixture. AVERTISSEMENT: Coupez la source d’alimentation principale au panneau central de disjoncteurs avant d’installer le luminaire. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
1. Attach nipple to the mounting strap, then secure it with a washer and hex nut. 2. Attach the mounting strap to the outlet box by using two mounting screws. 3. Take a glass panel and gently slide it into the frame in place, then press the clips which on the top of the metal frame and the clips which on the bottom of the metal frame to secure them.(See Fig.1) Repeat with other glass panels. 4. Secure the loop to nipple-1. 5.