System information

37
TM
S-Series Server / Client Manual
Version 2.2.1 Rev 1/14/07
www.cascadiadvrt.com
Sensors (Alarm Inputs) are connected on the back panel of the DVRT as pictured below.
Optional Alarm Inputs and Relay Outputs
Sensor Inputs (Alarm Inputs)
Digital Outputs (Relay Outputs)
When an Alarm Input (motion detector, door contact, etc.) is connected to the DVRT the
violated zone light will turn on. These alarm inputs can be used to activate the Digital
Outputs (Relay Outputs) and/or start the recording of the DVRT.
Left click the Digital Output Icon from the Server or the Client Software to manually
activate a Digital Output (Relay Output).
Connect one wire to the desired alarm input number and then connect the other wire
to the GND port.
Sensor Input Terminals
Relay Output Terminals
D/O Voltage
 DC 30V, 1A or below
 DC 110V, 0.3A or below
 AC 125V, 500mA or below
PTZ Connection (I/O Card)
To Serial Port on PC
PTZ Signal Cable