System information

32
TM
S-Series Server / Client Manual
Version 2.2.1 Rev 1/14/07
www.cascadiadvrt.com
Use Dynamic DNS Service when using a Dynamic IP Address. Check the Dynamic DNS box to enable
Dynamic DNS. If the DVRT is behind a firewall or going through a router (IP is Private IP) check the
Shared IP box. Then, left click the Register IP Address button (highlighted below) to open the
“Register at Dynamic DNS” window. After registering DDNS ID and Password, (instructions below)
manually update the IP Address by left clicking the “Dynamic DNS Update Now” button.
Setup Mode
Network Setup (cont.)
Dynamic DNS
1. DDNS ID: Request an ID (replaces IP Address).
2. ID Check: Left click to see if it is available.
3. Password: Displays the Password.
4. Email: Use the Email address to retrieve your forgotten User ID
and Password.
5. DVR Name: Name of the DVRT.
6. DVR Location: Location of the DVRT.
7. Retrieve DDNS: Left click and enter a Password to complete
the registration.
8. Forgot ID/Password: Left click and enter your Email Address
and the DVRT Name (Info will be emailed).
9. Done: Saves the settings.
10. Close: Closes the “Register at Dynamic DNS” window.
Note: When the DVRT is registered with the DNS Server,
the Client must use the DDNS ID to connect in place of
the IP Address.
2 1 3
4
5
6
7 8
9 10