System information

30
TM
S-Series Server / Client Manual
Version 2.2.1 Rev 1/14/07
www.cascadiadvrt.com
Setup Mode
DI (Alarm Input) Surveillance Schedule Setup
1. DI Channel: Select a channel (Sensor/Alarm Input) to configure.
2. Default: Resets the channel to Factory Default Setting.
3. Apply To All: Applies the current settings to all channels.
4. DI Schedule Display: Displays the schedule for the Sensor when the Sensor
(Alarm Input) is active.
5. Sound Alert: Makes a beep on the PC speakers upon a motion event.
6. E-Mail Alert: Sends an E-mail to a registered address upon a motion event (See
E-mail Setup).
7. Phone Alert: Calls a registered phone # upon a motion event (See Dial-up Setup).
8. Pop Up: Displays the active camera full screen upon a motion event.
9. Alarm-Out List: Activates Digital Out (Relay Output) upon a motion event.
4
5
6
3
2
1
7
8
9
Each Digital Input (Alarm Input) and Digital Output (Relay Output) can be custom
configured for specific applications. DI Schedule Setup is where each Digital Input
and Output is programmed to your individual installation. This is the DI Surveillance
Schedule Setup Tab.