Installation Guide

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING:
TO AVOID RISK OF ELECTRIC SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.
Installation Steps:
Bolt Nut
OP33485 / OP33585 / OP35085 / OP36985 / OP35685
1.Make wire connections with wire nuts:
---Connect the black wire from fixture to the black wire from power source.
---Connect the white wire from fixture to the white wire from power source.
---Attach the grounding wire from fixture to the grounding wire from the post.
Carefully tuck wires back into the post.
2.Place the fixture to the post, and secure with the dry wall screws.
3.Unscrew the 4 bolt nuts, and remove the frame from the fixture.
4.Install a bulb. (Please do not exceed the maximum capacity, which is
recommended on the package.)
5.Reattach the frame to the fixture by using the bolt nuts.
6.Turn on the power at fuse or circuit box.
Grounding Wire
Fixture Wire
Wire Nut
Post
Dry Wall Screw
Frame
Socket