Installation Guide
1. Attach the nipple to the mounting strap, then secure it
with a washer and hex nut.
2. Attach the mounting strap to the outlet box by using two
mounting screws.
3. Secure the top loop onto the nipple.
4. Choose the length of the chain you need, then weave
the fixture wire and the fixture grounding wire through
the chain, collar and canopy.
5. Connect one end of the chain with the loop by using a
loop lock.
6. Connect the other end of the chain with the top loop by
using another loop lock.
7. Thread the fixture wire and fixture grounding wire
through the top loop, nipple and mounting strap.
8. Pull out the outlet wires and house grounding wire from
the outlet box. Make wire connections using the wire nuts:
---The smooth wire (marked) from the fixture to the black
wire from the power source.
---The ridged wire (unmarked) from the fixture to the
white wire from the power source.
---Attach the fixture grounding wire to the mounting
strap with the green grounding screw. Then connect
it to the house grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
9. Attach the canopy to the mounting strap by inserting the
top loop, then secure it with the collar.
CAUTION: With silicone caulking compound, caulk
completely around where back of canopy meets with
the ceiling surface to prevent water from seeping into
the outlet box.
10. Gently place the glass shade over the socket, secure it
with socket ring.
11. Install a bulb (not included). See relamping label at socket
area or packaging for maximum allowed wattage.
12. Turn on the power at the main fuse or circuit breaker box.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
NP-ODD080
Outlet Box
House Grounding Wire
Wire Nut
Fixture Wire
Fixture Grounding Wire
Mounting Strap
Green Grounding Screw
Mounting Screw
Nipple
Canopy
Top Loop
Hex Nut
Washer
Collar
Loop Lock
Loop Lock
Chain
Loop
110315
Bulb Type T10 Max.60W
(or Bulb Type A Max.100W)
(Bulb not included)
Socket
Glass Shade
Socket Ring
Frame