Installation Guide

For Ceiling Light: (See Fig.1)
LK38312--- Page 2
1. Take out the the coupling, two hex nuts, washer, nipple(-c),
top cap, canopy, washer and grounding pad from the
hardware package for ceiling light.
2. Secure the coupling to nipple(-d), then screw nipple(-c)
into the coupling and secure it with a washer and hex nut.
3. Attach the top cap with the open side facing downward
and the canopy with the open side facing upward to the
fixure by inserting nipple(-c), then secure them with a
washer, grounding pad and hex nut.
4. Attach two screws to the mounting strap, then secure
them with two lock nuts. Adjust the length of the screws
if necessary.
5. Attach the mounting strap to the outlet box by using two
mounting screws.
6. Pull out the outlet wires and the house grounding wire
from the outlet box. Make wire connections using the wire
nuts:
---The black wire from fixture to the black wire from the
outlet box.
---The white wire from fixture to the white wire from the
outlet box.
---Attach the fixture grounding wire to the mounting strap
with the green grounding screw. Then connect it to the house grounding wire with a wire nut.
Carefully tuck the wires back into the outlet box.
7. Attach the canopy to the mounting strap by inserting two screws, then secure them with the bolt nuts.
8. Follow steps 7~9 as for Light Kit.
060218
TM
Outlet Box
House Grounding Wire
Fixture Grounding Wire
Wire Nut
Screw
Mounting Strap
Green Grounding Screw
Lock Nut
Mounting Screw
Mounting Parts for Ceiling Light
Fig.1
Hex Nut
Grounding Pad
Washer
Canopy
Top Cap
Bolt Nut
Nipple(-c)
Hex Nut & Washer
Coupling
Nipple(-d)
Fixture