Specifications

６-７-７ Factory Default

①

Navigate to {Menu}  {Setup}  {System}  {Factory Setup}.

② Select "Yes" when Initialization (Yes/No) Window appears.

All setting data will be initialized. In other words, all values will return to their factory

defaults.

６-７-８ Console / POS Port

①

Navigate to {Menu}  {Setup}  {System}  {Console / POS Port}.

② In the selection window, select the device by using arrow keys and select button.

６-７-９ Alarm

Alarm is used to notify system incidents [Video Signal Loss/HDD Full/Fan Failure/HDD Failure/HDD

Warning] with [Buzzer/E-mail/Relay01/System Check].

Any number of [Off/Buzzer/E-mail/Relay01/Popup Window] can be selected (with exception to "Off").

※ Popup Window

Enable at {Menu}  {Setup}  {System}  {Alarm}.

When an applicable event occurs, a system check window will

appear on screen (as shown). It may indicate: [Video Loss / HDD

Full / HDD Not Detect / Fan Failed / Storage Failure / Storage

Warning / Sensor Connection Tamper].

６-７-１０ Alarm Duration

① Establishes the duration of the alarm triggered by recording and system events

②

Navigate to {Menu}  {Setup}  {System}  {Alarm Duration}.

③ In selection window, set Alarm Duration by using arrow keys and select button.

６-７-１１ Menu Time Out

If no input is made in the System Setup menu via the front buttons, remote controller or mouse, the system

will automatically shift to real-time monitoring mode.

①

Navigate to {Menu}  {Setup}  {System}  {Menu Time Out}.

② In selection window, select and set desired time zone by using arrow keys and select button.

Off

1/2/3 MIN

If there is no input from the front button, remote controller, or mouse,

the system will shift to real-time monitoring mode.

User Setting

A custom time can be set by the user.

※ The time can be set between 1 ~ 60 minutes.

Automatic Menu Exit is not used

※ User can exit menu by pressing [ESC] button in System menu.

③ Selecting User Setting causes an input window to appear.

④ Enter the time by using numeric buttons or arrow keys and select button.

６-７-１２ Language

This

feature is used to select the language for the On Screen Display (OSD) menu of the system. 18 languages

are supported.