Specifications

54
６-６-５ Bandwidth
Navigate to {Menu}  {Setup}  {Network}  {Bandwidth}.
This sets up the limit of the bandwidth to be used when viewing live images, adjusting resolution/quality, and
transmitting the data by using the network.
Image Resolution
CIF / D1 / 960H
Image Quality
Adjust quality of the image (as the value increases, the
compression rate gets higher and image quality gets lower;
however the transmission rate also gets higher)
Bandwidth Limit
Can set network bandwidth between 40 ~ 4000kbps. As the
value increases, the network transmission speed gets faster.
Select Off to limit network bandwidth.
Transmission
Codec
JPEG / H.264
６-７ System
[Figure 6-54. System Setup Window]
1. DVR Name
Used to name the DVR device
2. ID For Remote Controller
Used to name the remote controller for running the system
3. ID For Key Controller
Unique system controller number setting
4. User Registration
Used to register, add, or delete users
5. Admin. Password
Used to set password for the Local System Administrator
6. Upgrade
Upgrades system firmware/system setup
7. Factory Setup
Initialize Setup (Factory default value, except for network
value)
8. POS
Set Ethernet POS or RS232
9. Alarm
Set alarm On/Off and alarm format
10. Alarm Duration
Set the alarm time to continuous/5/10/15/User setting
11. Menu Time Out
Used to set the time for exiting the System Setup menu
automatically and displaying the real-time monitoring screen
12. Language
System OSD language setting
13. Video Loss Event Delay Time
Allows "Video Loss" during setup period until "Video Loss" event
occurs (Duration for event can be set to 1/2/3/4/5 seconds)
６-７-１DVR Name
The initial value is the Mac address. (Up to 20 digits supported)
６-７-２ ID for Remote Controller
When multiple devices are used, set
the remote controller ID to identify input signals with the remote controller.