Specifications

[Figure 5-38. Backup Window]

① [Figure 5-38] shows the backup window menu.

②

Underneath "Information," available devices can be selected from the drop-down list.

③ Upon selecting a device from the list, its free space and total capacity will be displayed underneath.

④ Selecting a device additionally creates a directory name based on the initial values for the time

and channel to be displayed and the size of the file to be backed up to be calculated.

⑤ The backup time dictates what the directory is to be named. The first 12 digits are determined by the year/

month/day/hour/minute/second of the start time; the 12 digits in the middle by the year/month/day/hour/

minute/second for the end time. The last 2 digits refer to the number of folders on the selected device.

⑥ The backup time can be set manually upon selecting a device. As a rule, the start time cannot be later than

the end time, and the end time cannot be earlier than the start time.

⑦ To change the start and end time, press the Select button after choosing the start and end time.

Change year/month/day/hour/minute/second by using the arrow keys, then press the ESC button.

⑧ Changing the backup time causes the name of the directory to be backed up to be changed.

⑨ If the file to be backed up exceed's the free space on the device, its size will be displayed in either a yellow

or red box. Yellow meaning that it is capable of rerecording; red, if it isn't capable.

If the backup storage device isn't formatted and the box displaying the file size is in

yellow, executing the backup by pressing the Copy (Backup) button will make a prompt

appear asking (Yes/No) if the device should be erased. Selecting {Yes} will erase the

storage medium for the selected device.

⑩ Press the Copy (Backup) button. A prompt will appear to ask whether the backup should proceed or not.

※ Select [Yes] to back up the data or [No] to stop the backup. Otherwise, press the

[Cancel] button to return to the device selection mode in the backup window.

⑪ Select {Yes} to continue the backup.

５-１３ Setup Backup

The Setup Backup is used to back up all current menu setup values. This function enables the user to copy the

setup values and apply them to other devices.

５-１２-５ Common Backup Proce

dure