Specifications

５-４-２ Screen Brightness/Contrast/Color/Saturation/Sharpen/Camera Adjustment

Select {Adjust}. The screen division will change to 1 channel mode and a window will pop up

as shown below.

[Figure 5-19. Screen Setup Window]

Moving the camera, down, right, or left excessively may cause black or gray areas to appear on

the screen. The level at which such condition does not occur is the proper control range for the

camera.

５-４-３ Display Setting

After selecting Display Setting, the screen division changes to 1 channel mode and a menu pops up as shown

below. Options on this screen are: Camera Title On/Off, Control Bar On/Off, Button Sound On/Off, Border

Line Draw/Width/Color, Screen Saver, and Sequence Durations (1-10 seconds).

[Figure 5-20. Display Setting Window]

５-４-４Screen Saver

The Monitor connected to the DVR can be shut down to protect the monitor's screen. Navigate to

{Menu}  {Miscellane..}  {Display Setting}  {Screen Saver}

Name

Function

Duration

Duration of screen saver

Starting

Start of screen saver (0 to 24)

Waiting Time

Activation time for screen saver upon not receiving input