Specifications

26
⑥ Using the mouse, move the cursor to an area to be zoomed in the zoom control screen and
double-click on it.
⑦ The Zoom function operates in three levels: Normal, x4, and x16. Those three levels can be switched with
the mouse wheel. The user also can left-click and drag the yellow box to move the focused image in
higher than the x4 mode.
⑧
Using the remote and front panel, it is possible to change between the three zoom levels:
Front panel: {SELECT} button
Remote: {SELECT} button; the yellow box
can be moved by the arrow keys
５-３-５ Screen Control by using PTZ
The user can monitor in real-time with the PTZ camera.
The PTZ camera must be connected to the system. For external connections, refer to [2-3 Connection of Other
Devices]  [3) Terminal block]. Navigate to {Menu}  {Setup}  {Camera}  {PTZ}.
① Configure Protocol / ID / Baud Rate / Duration / Tour
[Figure 5-15. PTZ Setup]
※ Baud rate can be selected at 2400/4800/9600/19200/38400.
※ Duration can be selected at 5/10/15/20/User Setting (5-60) seconds.
※ Tour consists of Tour 1/Tour 2, and each tour can be set with 8 possible presets.
※ HD-SDI Real-Time Pro DVRs support 28 protocols for PTZ control. For supported protocols,
refer to APPENDIX.
② To control the PTZ camera, select {PTZ Control} in the Menu or press {PTZ} on the remote.
[Figure 5-16. PTZ Control]