Specifications

25
[Figure 5-13. Spot]
②
Navigate to {Menu}  {Miscellaneous}  {Misc. Control}  {Spot} and configure as Single
mode, Quad mode, Sequence, or Channel.
③ Event Spot
Event Spot enables quickly showing a channel set with the event function when event cases (Sensor, Motion,
and Audio) occur. The event check interval is one second. If events are detected in multiple channels, it shows
the channel with the last event. Navigate to {Menu}  {Setup}  {Recording}  {Alarm}  {Spot}.
④ Sequence Spot
The user can select more than one channel in Manual Spot and have sequential images through Spot.
Navigate to {Menu}  {Miscellaneous}  {Control}  {Spot}  {Sequence}.
５-３-３Menu in Monitoring Mode
The user can control all functions available in Monitoring Mode via {Menu}.
① Press the Menu button or right-click with the mouse. The {Menu} will then appear.
② Select the desired item by using the arrow keys or the mouse.
③ Press the ESC button or right-click with the mouse to exit the menu.
５
-３-
４
Zoom
Zoom
is
used to zoom in or out the 1 channel division image in real-time monitoring mode.
④
Navigate to {Menu}  {Zoom} or click the zoom icon on the control bar in real-time monitoring
mode.
⑤ After selecting a channel, it switches to 1 channel division mode and the zoom control screen
appears in the bottom-right corner.
[Figure 5-14. Zoom Control Screen]