Specifications

11
２-２-１ Basic Connections
※ By referring to above [Figures 2-1 ~ 2-4], make connections accordingly:
Connection
Order
Connection Device DVR Terminal
1 CCTV Camera Rear Panel Video IN
2 CCTV Audio Rear Panel Audio IN / OUT
3 CONFIG SWITCH Setup
Rear Panel Left 2ea Switch
(Refer to below; CONFIG SWITCH Setup)
4 CCTV Monitor Rear Panel TV / SPOT
5 VGA Monitor / LCD Monitor Rear Panel VGA-OUT
6 HDMI Monitor Rear Panel HDMI
7 Loop Rear Panel Loop
 CONFIG SWITCH Setup
Switch 1 Switch 2
２-３ Connection of Other Devices
There are differences between the various models regarding connection of other
devices.
Item HDRPJ16 HDRP8 HDRP16 HDRP4
Audio 16 8 16 4
Sensor 4 4 4 4
Relay 1 1 1 1
POS 1 1 1 1
Connect the PTZ controller cable, audio input/output, network, and sensors as shown below:
Connecting Device DVR Terminal
1
SPOT Monitor (CCTV Monitor) Rear Panel SPOT
2
Mike / Speaker Rear Panel Audio Input / Audio Output
3
LAN Cable Rear Panel Ethernet
4
PTZ Camera Rear Panel Terminal Block
5
Sensor / Relay / POS Rear Panel Terminal Block
6
Keyboard controller Rear Panel Terminal Block
1) SPOT Monitor
Connect Spot Monitor to the rear SPOT terminal.
HD-SDI Real-Time Pro DVRs support 1ea SPOT terminals.
2) Audio Input/Output
HDRPJ16 and HDRP16 support 16ea audio inputs. HDRP8 supports 8ea audio inputs. HDRP4
supports 4ea audio inputs.