Specifications

www.cascadiadvrt.com [phone] 23 | Page
2.4Setup–DeviceMode
IntheSETUPmenu,selecttheDEVICEtab.TheDevicemenuisdisplayedaspicturedbelow.Navigatethroughthe
menuitemsusingthemouseorthecontrolbuttonsontheremotecontrolandchangethevaluesofthemenuitems.

Figure2.4.1DeviceSetupScreen

Table2.4.1MenuItemsin
DeviceSetupScreen
Item Description
ALARMOUT Setthesensor,motion,andvideo‐lossforeachalarm.
CONTROLLER&PTZ SetthePTZbaudrate,protocol,andID .
SPOT‐OUT Setthedetailsforspotmonitoring.Itsupports2spot‐outs.
CHANNEL Selectspecifiedchannelformotionzonesetup.
MOTIONZONE SelecteitherFullZoneorPartialZoneformotionsensitivity.
MOTIONSENSITIVITY Setthelevelofmotionsensitivityforthespecifiedchannel(1~9).
KEYTONE Enable/disablekeytone.
REMOTECONTROLID SelectaremotecontrolID.
1.SelectIDnumber.

2.PressthesamenumberasIDsetinDVRontheremotecontrol.
3. An icon will be displayed on the Live Screen that corresponds to the
remotecontrolIDnumber.Theoptionsarefrom0to99.
SENSOR Selectsensornumberfrom1to4.
TYPE Set the type of sensor for the specified channel. Options are: OFF, N/O
(normalopen),andN/C(normalclosed).