Specifications
29 | Page
2‐3.Setup–RecordMode
IntheSETUPmenu,selecttheRECORDtab.Then,theRECORDmenuisdisplayedaspicturedbelow.Navigatethrough
themenuitemsusingthemouseorthecontrolbuttonontheremotecontrolandchangethevalueofthemenuitem.
Figure3.3.1.RecordingModeSetupScreen
Table3.3.1.MenuItemsinRecordingModeSetup
MenuItem Description
CHANNEL Select a channel for applying the following settings using the mouse or the
controlbuttonontheremotecontrol.Presstherightsquarebuttontochange
thesettingvalueofallchannelsatonce.Onceyouthevaluehasbeenchanged,
selectOKtoconfirmthechanges.
(RESOLUTION, FRAME RATE, QUALITY, RECORDING, PRE RECORD and POST
EVENTRECORD)
RESOLUTION
Analog DVR (A1204H, A2408H, A48016H): Select either CIF, Half D1 and D1
usingthemouseorthecontrolbuttonontheremotecontrol.
HD‐SDI DVR (HD204D, HD408D): Selecteither640x360,1280x720,1920x
1080usingthemouseorthecontrolbuttonontheremote
control.
FRAMERATE Settheframerateforthespecifiedchannel.Thesumoftheframeratevalues
from each channel cannot exceed the maximum frame rates for a specific
recordingresolution.
Typicalvaluesofthemaximumframerateforvideoareasfollows.