User’s Guide (Ver. 6.2) Analog DVR: H4, H8, H16 HD‐SDI DVR: HD204, HD408 High Definition H.264 Digital Video Recorder About This User’s Guide Before operating the unit, please read this user’s guide thoroughly and retain it for future reference.
Cautions Explanation of Graphical Symbols This symbol indicates the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. This symbol indicates the presence of “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock, property damage, personal injury, or death. WARNING To reduce a risk of fire or electric shock, do not expose this product to rain or moisture.
These precautions must be followed for safety reasons. Warning Do not use if the unit emits smoke. Do not disassemble the unit. Do not place any heavy or sharp objects on the unit. Do not place on uneven surface. Do not expose to shock or vibration. Do not move the unit when the unit is powered on. Do not block, and allow dust to accumulate in the air vents. Do not restrict airflow of the unit; doing so can damage the unit.
Table of Contents Product Components ................................................................................................. 6 Features ..................................................................................................................... 8 Specifications: A1204H, A2408H, A48016H ............................................................ 11 Specifications: HD204D, HD408D ........................................................................... 13 1.
3-2. SEARCH Screen ................................................................................................................ 50 3-2-1. TIME-LINE Search .......................................................................................................... 51 3-2-2. Event Search................................................................................................................... 52 3-2-3. Go To First Time .................................................................................
7-7-3. Storage ............................................................................................................................ 83 7-7-4. Device ............................................................................................................................. 83 7-7-5.Upgrade ........................................................................................................................... 83 7-7-6. System .......................................................................
DVR Unit Client Software CD Remote Control Battery1.
Features H.264 Video compression HDcctv/HD-SDI Compatible (HD204D / HD408D Model only) HDMI 1080P Video Output Reliable File System 4 Channel Audio Recording: Perfect audio sync. for court evidence.
Easy and Simple Graphic User Interface Simple Scheduler Easy Software Upgrade via USB flash drive or Network software.
Exclusive File Format and AVI Backup Time stamp over AVI backup data for court evidence S.M.A.R.T.
Specifications: H4, H8, H16 ITEM Channel 16 channels NTSC/PAL Video Loss Check Yes VGA 1 VGA HDMI 1 HDMI BNC 1 Spot 1 4 Line input & 1 Line output Audio Codec G.711 (ADPCM) Sensor Input 4 ch (NC/NO Selectable) Alarm Output 1 Alarm out Compression H.
User I/F Serial port Network USB Port 2 (Front 1, Rear 1) Menu Display GUI Input Method Remote control, Mouse Console - PTZ control 1 RS-485 Termination 1 Dynamic DNS Yes (Free DDNS) Network Interface 10/100 base-TX Ethernet (RJ-45) Network Streaming CIF 120fps/100fps Web viewer (1:1) Live, Search, Backup, PTZF, Remote Setup Network 3G Mobile Viewer (1:1) Live, Search, PTZF Access Single Monitoring SW (1:1) Live, Search, Backup, PTZF, Remote Setup Multi Monitoring SW (1:n) Live
Specifications: HD204D, HD408D ITEM Input Video Output Audio Alarm Operation Live HD204D / HD408D Channel Input Level 4/8CH HD-SDI (720p25/30/50/60, 1080p25/30, 1080i50/60) Main Monitor HDMI (Max. 1920x1080) Sub Monitor VGA (Max. 1920x1080) HD-SDI Monitor N/A CVBS N/A SPOT N/A Input 4/8CH Line Input Output 1CH Line and HDMI Output Audio Codec G.
External Storage 1/2 e-SATA for RAID File system Self-developed, Reliable and Stable File system S.M.A.R.
1. Name, Function and Connection 1‐2. Rear Panel 1‐2‐1. H8 1 2 3 4 5 6 7 8 9 10 11 Cooling Fan Video Input & Video Output Audio Input HDMI Video Output RS 232 Terminal (For testing purposes) VGA Output eSATA Port Network RS-45 Ethernet Port USB Port RS-485 PTZ Camera control terminal DC12V Power Input 1‐2‐2.
1‐2‐3. H 16 1 2 3 4 5 6 7 8 9 10 11 Cooling Fan Video Input & Video Output Audio Input HDMI Video Output RS 232 Terminal (For testing purposes) VGA Output eSATA Port Network RS-45 Ethernet Port USB Port RS-485 PTZ Camera control terminal DC12V Power Input 1‐2‐4.
1‐2‐5. HD408 1 2 3 4 5 6 7 8 9 10 11 HD-SDI Video Input Audio Input RS 232 Terminal (For testing purposes) VGA Output HDMI Video Output RS 232 Terminal (For testing purposes) USB Port RS-485 PTZ Camera control terminal RS-485 Termination Network RS-45 Ethernet Port eSATA Port RS-485 DC12V Power Input 1‐3. Remote Control ① ID: When a remote control ID number is set in the DVR, input the DVR ID number. ② REC: To start and stop manual recording.
⑦ PLAY/PAUSE: To play or to pause the footage in playback mode. ⑧ FF: To fast forward the footage at 1x, 2x, and 4x speeds during playback. ⑨ Control button: Press to move the menu items or select channel. ⑩ SETUP: To launch SETUP menu. ⑪ SEARCH: To go to the search menu. ⑫ ESC: During setting ‐ To return to previous menu screen. During playback ‐ To exit from playback System Lock – To lock a system when pressing ESC button for 5 seconds.
1‐3.
| P a g e
1‐6. Setting Daylight Saving Time If the DVR is set to Day Light Savings Time and synchronized NTP (Network Time Protocol), Take next steps. 1. Click a mouse‐right button or SETUP button on the front panel of DVR to enter the SETUP mode. The default Password is “1111”. 2. Go to SETUP>SYSTEM>SET DATE & TIME 3. Select DAYLIGHT SAVING.
1‐7. Setting NTP (Network Time Protocol) 1. When the DVR is connected with internet and the DVR need to be syncronized with NTP (Network Time Protocol), set SETUP>SYSTEM>NTP ON. 2. Select proper TIME ZONE time.
2. Setting up the DVR The following sections detail the initial setup of the DVR. 3‐1. Setup – Main screen and Menu Tree To enter the setup menu, right click on the mouse and select setup from the submenu or press the setup button on the front panel or the remote control. Figure 3.1.1. Setup Menu Tree When the DVR prompts the LOG‐IN window, enter the PASSWORD using the virtual keyboard, or the front panel, or the remote control. The factory default password is 1111.
DISPLAY – OSD – OSD CONTRAST – SEQUENCE – SEQUENCE DWELL TIME – CHANNEL NAME - COVERT - BRIGHTNESS - CONTRAST - HUE - SATURATION VIDEO OUTPUT RECORD – - CHANNEL DEVICE 24 | P a g e - RESOLUTION - FRAME RATE - QUALITY - RECORDING - SENSOR RECORDING - PRE RECORD - POST EVENT RECORD - AUDIO - SCHEDULE
– – – – ALARM OUT - SENSOR IN - MOTION ON - VIDEO LOSS ON - ALARM DURATION - ERROR ALARM CONTROLLER & PTZ - CHANNEL - NAME - SPEED - ID SPOT OUT - SPOT OUT 1 - SPOT OUT 2 CHANNEL - MOTION ZONE - MOTION SENSITIVITY – KEY TONE – REMOTE CONTROLLER ID – SENSOR - TYPE STORAGE – OVERWRITE – DISK FORMAT – DISK INFO – RECORDING LIMIT – S.M.A.R.
– PLAYBACK AUTHORITY NETWORK – PORT – NETWORK AUDIO PORT – WEB PORT – NETWORK TYPE (DHCP, LAN) – DDNS – NETWORK STREAM CONFIG – SAVE SETUP TO A USB – LOAD SETUP FROM A USB – LOAD DEFAULT – LOAD FACTORY DEFAULT – SOFTWARE UPGRADE QUICK SETUP – USE QUICK SETUP - – 26 | P a g e INPUT DESIRED DAYS CUSTOMER SETTINGS - RESOLUTION - FRAME RATE - QUALITY - RECORDING - DAYS TO RECORD
2‐2. Setup – Display Mode In the SETUP menu, select the DISPLAY tab. Then, the DISPLAY menu is displayed as pictured below. Navigate through the menu items using the mouse or the control button (◀ ▲ ▶ ▼) on the remote control and change the value of the menu item. Figure 3.2.1. Display Mode Setup Screen Table 3.2.1. Menu Items in DISPLAY Mode Setup Item Description OSD Enable/disable on‐screen‐display.
NAME Set the channel name. Press the right square button and set the channel name and select OK using the mouse or the control button (◀ ▲ ▶ ▼) on the remote control. The name can be made by 10 characters at most. COVERT Enable/disable display of the specified video channel in live display mode. BRIGHTNESS Change the brightness value of the specified channel. (0~100) CONTRAST Change the contrast value of the specified channel. (0~100) HUE Change the hue value of the specified channel.
2‐3. Setup – Record Mode In the SETUP menu, select the RECORD tab. Then, the RECORD menu is displayed as pictured below. Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item. Figure 3.3.1. Recording Mode Setup Screen Table 3.3.1. Menu Items in Recording Mode Setup Menu Item CHANNEL Description Select a channel for applying the following settings using the mouse or the control button on the remote control.
QUALITY Analog DVR CIF Half D1 D1 A1204H 120fps/4CH 120fps/4CH 120fps/4CH A2408H 240fps/8CH 240fps/8CH 120fps/8CH A48016H 480fps/16CH 240fps/16CH 120fps/16CH HD‐SDI DVR 640 x 360 1280 x 720 1920 x 1080 HD204D 120fps/4CH 48fps/4CH 20fps/4CH HD408D 240fps/8CH 96fps/8CH 40fps/8CH Select the recording quality for the specified channel. LEVEL 1 ~ LEVEL 5 (Allows the user to change the recording QUALITY of the selected CHANNEL) RECORDING Assign the recording mode for each channel.
Figure 3.3.2.
2‐4. Setup – Device Mode In the SETUP menu, select the DEVICE tab. Then, the device menu is displayed as pictured below. Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item. Figure 3.4.1. Device Mode Setup Screen Table 3.4.1. Menu Items in Device Setup Screen Item Description ALARM OUT Set the sensor, motion, and video loss for each alarm. CONTROLLER & PTZ Set the PTZ baud rate, protocol, and ID.
2‐4‐1. ALARM‐OUT Figure 3.4.2. ALARM‐OUT Setup Screen Table 3.4.2. Menu Item in ALARM‐OUT Setup Screen Item ALARM OUT Description Select an Alarm out number. Available No: 4 CH (1) SENSOR IN Enable Alarm Out by Sensor up to 4 Inputs. MOTION ON Enable Alarm Out by Camera Motion up to 4 cameras. VIDEO LOSS ON Enable Alarm Out by Video Loss up to 4 cameras. ALARM DURATION Set the alarm dwell time from 5 to 60 seconds. ERROR ALARM Set the error type for the alarm activation.
2‐4‐3 CONTROLLER & PTZ Setup To control the PTZ functions of the camera, connect a controller to the RS‐485 port. ① Connect the RS‐485 cables of the PTZ camera to the RS‐485 port on the rear panel. ② Press the PTZ menu button. Then PTZ menu screen is displayed as below. Figure 3.4.4. PTZ Control Setup Screen Note: For speed dome cameras that support RS‐485, connect them directly to the RS‐485 port. If the camera is controlled with RS‐232C, use a RS‐485 to RS‐232C signal converter.
2‐4‐4. Motion Zone Setup Select MOTION ZONE using the mouse or the control button on the remote control and select either PARTIAL ZONE or FULL ZONE using the mouse control. The default value is FULL ZONE. If FULL ZONE is selected, the motion zone grid screen is not displayed. Only set the level of sensitivity for MOTION SENSITIVITY. FULL ZONE: The motion sensor is active on the whole screen. PARTIAL ZONE: The motion sensor is active in the set detection frame.
2‐5. Setup – Storage Mode In the SETUP menu, select the STORAGE tab. Then, the STORAGE menu is displayed as pictured below. Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item. Figure 3.5.1. STORAGE Setup Screen Table 3.5.1. Menu Items in STORAGE Setup Screen Item OVERWRITE Description When enabled, the DVR will continue recording and overwrite the oldest existing recorded data once the hard drive is full.
2‐6. Setup – System Mode In the SETUP menu, select the SYSTEM tab. Then, the SYSTEM menu is displayed as pictured below. Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item. Figure 3.6.1. SYSTEM Setup Screen Table 3.6.1. Menu Items in SYSTEM Setup Screen Item DVR ID Description Set DVR ID using the mouse or the control button on the remote control. Press OK to apply the DVR ID.
control and press OK button to set the present date and time. DAY LIGHT SAVING Select DAYLIGHT SAVING using the mouse and the control button on the remote control and select the appropriate daylight saving time zone. If choosing EU or OTHERS, set the applicable conditions. The options are: OFF: Daylight saving is turned off. USA: Applies the USA daylight saving time. EU: Applies the EU daylight saving time. ‐ Select the GMT AREA using the control button.
TIME: Synchronize the clock at the time daily which is set on the connection period menu. CONNECTION PERIOD: 1~24 TRANSMISSION MODE: Select e‐mail attachment format as an image or a video clip of the SEND EMAIL channel that triggered the alarm when an alarm event is triggered. IP NOTIFICATION: Enable/disable sending e‐mail when the IP address of your DVR is changed. EVENT ALARM: Enable/disable sending e‐mail reports on the channel that triggered the alarm when an alarm event is triggered. S.M.A.R.
2‐7. Setup – Security Mode In the SETUP menu, select the SECURITY tab. Then, the SECURITY menu is displayed as pictured below. Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item. Figure 3.7.1. SECURITY Setup Screen Table 3.7.1. Menu Items in PASSWRORD Setup Screen Item Description USER Admin only can access to the menu.
Selected Checkbox: The user can access to the function. Blank Checkbox: The user can not access to the function. USER PASSWORD Options are ADMIN, NETWORK, USER1, USER2 and USER3. Select USER PASSWORD using the mouse or the control button on the remote control and press SEL button. Select user type and enter the current password. And, enter a new password, enter the same password again to confirm and select OK. Then the message “PASSWORD CHANGED” is displayed. The factory default password is 1111.
2‐8. Setup – Network Mode In the SETUP menu, select the NETWORK tab. Then, the network menu is displayed as pictured below. Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item. Figure 3.8.1. NETWORK Setup Screen Table 3.8.1. Menu Items in Network Setup Screen Item NETWORK PORT Description Set a proper port number for connecting to network.
DDNS 2: Select this type when wants to use other general‐purpose DDNS Server. DDNS INTERVAL: Set the connection interval (5‐60 minutes) NETWORK Set the value for network streaming. STREAM 2‐8‐1. DDNS User can use the function to connect to a network with a domain name. The user can select one type among three DDNS Servers which is supported for free service. The DDNS interval can be set from 5 to 60 minutes.
2‐8‐2. Network Ports When you connect one or more DVRs to a network through an IP sharing device, each device must have a unique TCP port number for access to each unit from outside the LAN. The IP sharing device must be configured to forward the assigned port to the specific DVR. Note: This port number is listed next to the Port menu option in the Network Setup screen. If you plan to access the DVR units only from within the same LAN, the TCP port does not have to be changed.
2‐9. Setup ‐ CONFIG Mode In the SETUP menu, select the CONFIG tab. Then, the configuration menu is displayed as pictured below. Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item. Figure 3.9.1. Configuration Setup Screen Table 3.9.1. Configuration Setup Item Description SAVE SETUP TO User can save the current configuration (Setting values) of the DVR to the USB flash A USB drive.
LOAD DEFAULT Press the button to reset the system to the default settings. (The following settings such as Language, DVR ID, Security User Authentication, Security User P/W, Date format, DLS settings, Network settings, HDD overwrite, Limit recording, HDD serial number, and HDD ERROR time will not be included.) LOAD FACTORY Press the button to reset the system to the factory default settings. DEFAULT SOFTWARE Upgrade softeware to the latest version.
2‐10. Quick Setup In the MENU, select the QUICK SETUP tab. Then, the QUICK SETUP menu is displayed as pictured below. Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item. The QUICK SETUP has high priority than other setting values on RECORDING and NETWORK menu. The QUICK SETUP also cannot set to classified according to channel. Figure 3.10.1. Quick Setup Screen Table 3.10.1.
3. Live, Search and Playback 3‐1. Live Viewing Screen In the Live screen, video inputs from the cameras are displayed as they are configured in the Display Setup screen. Various On‐Screen Display (OSD) symbols, which indicate the status of the DVR, are described in Table 4.1.1. Figure 4.1.1. Live Viewing Screen The following status bar hides automatically and appears again when putting a mouse pointer to the bar. Table 4.1.1.
Backup button. Click this button to do a back‐up. PTZ button. Opens the PTZ control menu. Sequence button. Click this button to use a sequence function. Manual Record button. Click this button to enable manual recording. Alarm‐out function On/Off button. Select this button to disable the alarm. Click the split screen icon to change the current split screen mode using the mouse or SEL button. Displays the current date and time. Remote control ID display.
Indicates that a network client is connected to the DVR. Indicates that sequencing mode is enabled. 4‐2. SEARCH Screen To enter the search screen menu, select SEARCH menu on the screen using the mouse or press SEARCH icon on live screen. Figure 4.2.1. Search Screen There are 7 ways of search menu such as TIMELINE, EVENT, GO TO FIRST TIME, GO TO LAST TIME, GO TO SPECIFIC TIME, ARCHIVE and LOG on the screen.
3‐2‐1. TIME‐LINE Search The TIME‐LINE search window is used to find the stored video by using the time line bar. When the Timeline menu is selected, the user can see a calendar which has the recorded data. Select a specific date and time. Use a drag‐and‐drop function of the mouse control. User can select a specific minutes using a button in the above red box. Press the PLAY button after selecting the specific time. Press the PREV to return to the SEARCH window.
3‐2‐2. Event Search The Event Search window is used to find stored video. Figure 4.2.2. Event Search Screen When the Event menu is selected, the user can see a calendar which has recorded data. Select a specific date and the event log will be displayed. Press the PLAY button to playback the data or the SAVE button to save the data after selecting the specific data. User can find a data of the specific channel and event using a button in the above red box. Press the PREV to return to the SEARCH window.
3‐2‐5. Go To Specific Time Figure 4.2.3. Go To Specific Time User can search for video data from a specific instance by setting the date and time in the Go To Specific Time menu. Use the mouse or the control button on the remote control to change the date and time value and press the PLAY button after setting. If there are not video data in the set date and time, No Data Exist message displays. 3‐2‐6. Archive Search The ARCHIVE Search window is used to find previously stored video or images. Figure 4.2.
3‐2‐7. Log Search You can access the LOG list search screen by selecting LOG on the SEARCH window. Figure 4.2.5. Log Search Screen When the Log menu is selected, the user can see a calendar which has recording data. Select a specific date and press NEXT button, and then the log data will be displayed. Press the SAVE button to save the data and then the data is saved as a text file format.
3‐3. Play Mode During playback of a recorded event, the mode changes from SEARCH to PLAY. While in PLAY mode, you may return to the SEARCH screen by pressing the X button on the status bar or the ESC button of a remote control. Figure 4.3.1. PLAY Mode Screen The following status bar hides automatically and appears again when putting a mouse pointer to the bar. Table 4.3.1. Button Functions in PLAY Mode Button Description Return to the previous menu screen, search window, or exit from the Menu.
4. PTZ Control To control the PTZ functions of the camera, select PTZ menu on the screen using the mouse. Select the item you wish to control the PTZ camera and control them using the mouse or the control button on the remote control. Please refer to the table 5.1. for the control. Table 5.1. Button Functions in PTZ Control Item Figure 5.1. PTZ Description INITIALIZE Initialize the PTZ settings of the selected camera.
5. Back Up 5‐1. Still Image Backup onto USB Flash Drive Still images can be captured and archived onto a USB flash drive or a hard drive in live mode or while playing back recorded video. In the live mode, press the BACKUP button to launch the archive function or select BACK UP menu on the screen using the mouse. 1. Select a specific channel which wants to backup on live screen. 2. When you press BACKUP button, the archiving screen will display as Figure 6.1.1. 3.
5‐3. Transferring Still Images or Video from the ARCHIVE List The stored data in the hard drive can be found in the ARCHIVE list in the SEARCH window. User can back up still images or video into the storage device from the ARCHIVE list. 1. Select the date to begin searching and navigate through the days using the mouse or the control button on the remote control. 2. Once you have selected the date, press the NEXT button to open the list of stored data. 3.
5‐4. Playback of Backup Video AVI format: AVI format video can be played back using Window Media Player™ or other media player that is compatible with AVI format video. NSF format: H.264 format video can be played back using the player (the HD player) that the DVR copies on USB flash drive with video. This format is only available when the user selects a huge backup. Three files are copied on USB flash drive. - H.264 file: H.264 format video file. - INDEX file: Title file of date and time.
6. Network Access Using the Single Site Network Viewer The DVR provides a live remote monitoring feature. Remote monitoring requires installation of the network viewer on your PC. NOTICE In a high bandwidth network, a maximum of four users can access one DVR simultaneously. In a low bandwidth network it is recommended that only one user access the DVR at a time. 7‐1.
6‐2. Installing the Network Viewer 1. Insert the provided CD in the CD drive and double-click “UMSMultiClient (XXXX).exe” 2. Select a destination folder and click “Next”. 3. Select the program folder and click “Next”. 4. The setup status screen is displayed. 5. After the installation is completed, “UMS Multi Client” icon displays on the desktop screen.
6‐3. Live Monitoring Mode and Functions. Button Function Description DATE & TIME Displays the current date and time. CONNECT/DISCONNECT Connect/disconnect network connection. 62 | P a g e SEARCH Switches the live mode to search mode. DISPLAY MODE Select a channel and screen display mode. PAN/TILT/ZOOM/ Control the PAN/TILT/ZOOM/FOCUS FOCUS features on the remote camera. CAPTURE Capture a still image from the live screen.
PLAY/PAUSE Play/pause live video. ALARM The ON/OFF button of the alarm output of the DVR. If the DVR has an alarm output, the button will be indicated red. SETUP Display the setup screen of the network viewer. HDD USAGE DVR HDD storage Indicator. NETWORK Shows the transferred frames and network BANDWIDTH bandwidth. AUDIO Adjust the volume. The audio can be turned on or off by clicking the audio icon. LOG WINDOW Shows the even log, date, and time.
Still‐image of live screen can be captured and saved as a BMP or JPEG file. 1. Click the channel to be captured. Then the selected channel will be highlighted red. 2. Click the CAPTURE button. Then the IMAGE CAPTURE dialog is displayed. 3. Set the SAVE PATH, FILE NAME, and FILE FORMAT and click the OK button to save the captured still image. 6‐4. Bi‐directional Audio The UMS Client allows for bi‐directional audio between the client and the DVR unit.
DATE & TIME Displays the recording time of the data selected on the time bar at the bottom of the main user interface. DISCONNECT Disconnect network connection. LIVE Switches the search mode to live mode. CAPTURE Capture a still image from live screen. MARK IN Set the start time for video backup. MARK OUT Set the ending time for video backup. BACKUP Backup the selected recorded video as AVI format.
3. Drag the marker on the timeline bar to select the hour. (NOTE: The marker can only be set on the solid blue bar, which indicates the recorded data) 4. Press the PLAY button to begin playback of the recorded data. Backing up video from the remote DVR Video recorded in the remote DVR can be backed up on the PC HDD as an AVI format or NSF format. 1. Connect to the remote DVR and play the video recorded in the remote DVR. 2.
start the backup process. Select Channels: Select channels to backup. Start Time / Stop Time: Backup time can be changed. File Path: Shows the folder that the backup file is recorded. File Format: Select backup file format.
6‐6. PC System Configuration Click the SETUP button. Then the Setup dialog is displayed as below. Setting General Set the Security Option, Save Path, and Miscellaneous. Security Option: Set a password for security options. When you access any of the selected functions, you will need to enter the password. Save Path: Specify the location to record for backup and still image capture.
Setting Site The remote DVRs can be added, modified, and removed. Setting Event Set the record path and the size of local disk space for the log files. LOG – Select to save event log into ‘log file’. ICON – Select to display the event on live video. EVENT LIST – Select to show the event in the ‘Event List” window of live mode. Search and check the recorded log data.
Setting Record Set the recording conditions and select channels to record. Select the local disk to use and the amount of disk space you want to allow the program to use for recording.
7. Network Access Using the Multi‐Sites Network Viewer 7‐1. Overview The UMS Multi‐Client is a multiple site monitoring client software with; video, audio, and alarm signals from the DVRs over networks. The UMS Multi‐Client does not limit the number of DVR units to register. The program displays to up 256 live videos on one display and even playback videos window on the same or another display monitor. On the program, user may control PTZF cameras on the DVRs.
2. Select a destination folder and click “Next”. 3. Select the program folder and click “Next”. 4. The installation status screen is displayed. 5. After the installation is completed, “UMS Multi Client” icon displays on the desktop screen.
7‐4. Live Window When installation is completed, double click the “UMS Multi Client” icon on your desktop to start the program. 7‐4‐1. Main User Interface 8‐4‐2. Control Buttons Button Description Click this icon to run a playback window to search and play videos LOCAL PLAYBACK that are recorded in the local PC. Click this icon to run a playback window to search and play videos REMOTE PLAYBACK that are recorded in the remote DVR.
THUMBNAIL REFRESH: Click this icon to refresh and renew thumbnail image of the connected sites. SITE ADDITION: Click this icon to open ‘Site Addition’ window. SITE DELETE: Click this icon to delete site from the index window, after disconnect a site. NET FINDER: Select the site from the index window and click this icon to modify the information of specific site. SITE MANAGEMENT Click this icon to connect the selected site/sites. CONNECT DISCONNECT Click this icon to disconnect the selected site/sites.
7‐5. Search and Playback Window 7‐5‐1. Main User Interface You can access to search window by clicking the search icon (Local Playback / Remote Playback) on the upper left of the Live Window. 8‐5‐2. Main Control Panel Button Description Click this icon to run a playback window to search and play videos that are LOCAL PLAYBACK recorded in the local PC. Click this icon to run a playback window to search and play videos that are REMOTE PLAYBACK recorded in the remote DVR.
Click this icon to connect the selected site/sites. CONNECT DISCONNECT Click this icon to disconnect the selected site/sites. Click this icon to setup configuration of UMS MULTI CLIENT. SETUP Click this icon to capture a still image. CAPTURE Opens list of events logged by the UMS Multi Client. EVENT LIST Click this icon to set the beginning time for backup of the recorded video in MARK IN AVI format. Click this icon to set the ending time for backup of the recorded video in AVI MARK OUT format.
7‐6. Setup of UMS Multi Client Click the setup icon to setup the configuration of UMS Multi Client software. The SETUP window is displayed as below. 8‐6‐1. General 8‐6‐1‐1. Security Option: Set a password for security options. Select security options and set a password. Then when you access any of selected functions, you need to enter the password. You can also set the save path for capturing and backup. 8‐6‐1‐2. Save Path: Specify the location to save captured still image for Capture and Backup data.
8‐6‐2. Event Event log can be archived and searched. 8‐6‐2‐1. Archiving Event Log: Specify the location to save event logs and select event to archive.
7‐6‐2‐2. Archiving Event Log: Event log can be searched from selected time. 7‐6‐3. Record 7‐6‐3‐1. Record Setup: You can set the recording conditions as the following; Always, Event, or Auto record. And you can also select target DVR/DVRs and channel/channels. When you set the recording condition to event, you can set event for motion or alarm with duration.
7‐6‐3‐2. Record Local Storage Setup: You can select the local disk to record and the amount of disk space you want to allow the program to use for recording. You can also select the option to overwrite data or stop recording when the maximum amount of disk space is full. 7‐6‐4. OSD You can select the OSD (On Screen Display) to be displayed.
7‐6‐5. Language You can select a language to be display. 7‐6‐6. About “About” provides network client version information.
7‐7. Remote Setup The menu settings for the DVR unit can be set from a PC, via network. Put the cursor of the mouse on the channel which is connected to the site and press the right. Then the following window is displayed as below. Select the Remote Setup. Then the setup window is displayed. The specified menu screen is displayed on the upper left of the screen. Setting is the same as with the DVR menu setting. Refer to the corresponding pages for details on the setting items. 7‐7‐1.
7‐7‐3. Storage Select Storage to configure continued recording settings by overwriting the hard disk and the storage period for the recording data. 7‐7‐4. Device Select Device to set the motion zone, sensor input/alarm output conditions, PTZ control and spot setting conditions. 7‐7‐5.Upgrade Select Upgrade for remote firmware upgrade over network.
7‐7‐6. System Select System to set syst8m and time settings. 7‐7‐7.Network Select Network to set information about the DVR network.
7‐8. Operation 7‐8‐1. Addition, Delete, and Modify of DVR Sites 8‐8‐1‐1. Addition of Sites 1. Click SITE ADDITION button. And then the following window will be displayed as below. o Model: User has to select the proper DVR model. SDVR series, H series DVR N series DVR, HD DVR IP Camera o Site Name: Input a name that properly describes a site. o IP Address: Input IP address (Public IP address of a router that DVR is connected.) or Domain name that is registered at www.ddnscenter.com o Port No.
7‐8‐1‐2. Delete of Sites 1. Select the site/sites to delete from the directory window. 2. Click SITE DELETE button. And then the selected site/sites is/are deleted. 7‐8‐1‐3. Modify of Sites 1. Select the site/sites to modify from the directory window. 2. Click NET FINDER button. And then the following window will be displayed as below. 3. Click MODIFY button. And then the modified information is applied.
7‐8‐2. Connect and Disconnect 7‐8‐2‐1. Connect 1. Select site/sites to connect from the directory window. 2. Click CONNECT button, and then site/sites displays/display as connected.
7‐8‐2‐2. Disconnect 1. Select site/sites to disconnect from the directory window. 2. Click DISCONNECT button, and then selected site/sites disconnected. 7‐8‐3. Still‐image Capture During Live 1. Double‐click a channel to capture from the display screen. (Otherwise all channels will be captured.). 2. Click CAPTURE button. And then a Capture window will be displayed as below. 3. Set Save path, File Name, and File Format. And then click OK button.
4. Still image is saved as set in Capture window. 7‐8‐4. Recording Video on Local PC during Live 1. Click SETUP button. And then a setup window will be displayed as below. 2. Select Record and set the values. 3. Select Disk and set the values.
4. Click RECORD ON button. And the color of button is changed. 5. Live video data is recorded as set in Record and Disk setup. These video data can be searched and play‐backed with Local Playback.
7‐8‐5. Local Playback and Remote Playback 8‐8‐5‐1. Playback of recorded video on local PC 1. Click LOCAL PLAYBACK button. And then Playback Window will be displayed over the Live Window. 2. Select site/sites to connect from the directory window. 3. Click CONNECT button. And then Green bar displays on Search calendar and timeline scale window. 4. Move the marker on the timeline scale to where there is video data and press the PLAY button. 5. Video data that is recorded on local PC will be play‐backed.
7‐8‐5‐2. Playback of Recorded Video on Remote DVR 1. Click REMOTE PLAYBACK button. And then Playback Window will be displayed over the Live Window. 2. Select the site to connect from the directory window. 3. Click CONNECT button. And then Green bar displays on Search calendar and timeline scale window. 4. Move the marker on the timeline scale to where there is video data and press the PLAY button. 5. Video data that is recorded on the remote DVR is play‐backed.
7‐8‐6. AVI Backup During Playback You can back up the recorded videos in AVI format during playback. 1. Double‐click the target channel to backup. 2. Select the beginning time by using the search calendar and timeline scale bar. 3. Click MARK IN button on the timeline scale to select the beginning point of the backup. 4. Click MARK OUT button on the timeline scale to select the ending point of the backup.
7. AVI video data is recorded as set in AVI Backup window. AVI format video can be played back by Window Media Player™ or other media player that is compatible with AVI format video. Notice When backing up as a NSF format, the user can playback using the DVR Player, which is downloaded into the USB flash drive or the DVD-R with the backup data.
8. Network – By a Web‐Browser Viewer The DVR provides a live remote monitoring feature by web‐browser viewer. (NOTE: Web‐Brower is only available for Internet Explorer) 1. Check the IP address of the DVR from SETUP>SYSTEM>DESCRIPTION>IP ADDRESS. 2. Input the IP address or Domain name address that you pre‐registered on www.ddnscenter.com . 3. Click this bar. Then the dialog box is displayed. 4. Click “Install” to download and install the Active‐X control. 5.
6. Click the CONNECT button on the Left upper corner of web‐viewer. Then “Connect” dialog is displayed. Enter IP address (or Domain name address that you pre‐registered on www.ddnscenter.com, Port number and Password and click “Connect” Site Name: Input a name that properly describes a site. IP Address: Input IP address (Public IP address of a router that DVR is connected.) or Domain name that is registered at www.ddnscenter.com Port No.: Input port number of DVR. Default Port Number is “5445”.
8. SETUP: The menu settings for the DVR unit can be set from a PC, via network. Refer to the detail of Remote Setup description of UMS Multi Client.
9. Network Access Using the Mobile Viewer 9‐1. Installing the Viewer 1. Enter the Apple App Store (For Apple iPhone/iPad Users) or the Android Market (For Android Phone/Tablet users) 2. Search “iUMS” in the App Storeⓒ or the Android Marketⓒ 3. Install the “iUMS” app. Then iUMS icon will be display on the phone. Notice 3G Data Usage applied without Wi-Fi connection. Please check with your Phone Carrier. 9‐2. iUMS for Android Live Monitoring and PTZ Control 9‐2‐1. Live 1.
2. Select the registered device and select the channels to monitor up to 4 channels. Then press SELECT button. 3. The app will display the selected channel(s). Double tap the channel screen to switch 1 channel display to 4 channels split display or vice versa. 9‐2‐2.PTZ Control To control the PTZ function of the camera, tap the channel screen, then the channel name will be Yellow. Using PTZ menu icons on the screen, control PTZF control.
9‐3. iUMS for Apple iPhone 9‐3‐1. Live 1. Open the installed “iUMS” App and select the Live Preview. Then click the menu button of the phone to add a remote device. 2. Select the registered device and select the channels to monitor up to 4 channels. Select Mode as ‘Live’ and click ‘Connect’ . 3. The app will display the selected channel(s). Double tap the channel screen to switch 1 channel display to 4 channels split display or vice versa. 9‐3‐2.
10‐3‐3. Playback 1. Select the registered device and select the channels up to 4 channels to search and playback. Select Mode as ‘Playback’ and click ‘Connect’ . Then the search window will display. 2. Select the date, hour, minute, AM/PM and click ‘Connect & Play’ . 3. The app will display the selected channel(s). Double tap the channel screen to switch 1 channel display to 4 channels split display or vice versa. 4. Tap the menu button. Then Playback menu icons will display.
| P a g e
APPENDIX: How to Connect the Network A. How to set the IP address of the DVR and open TCP port of the router? The port forwarding steps will vary depending on the brand and model of the router. Port Forwarding is required to access the DVR remotely. (NOTE: Please check your router’s User’s Manual for detailed instructions on Port Forwarding) Connect network cable between DVR and Router or ADSL modem. 1. 2.
3. Open the default DVR port 5445 and the Default Web Port 80 on the router if the DVR’s NETWORK TYPE is set to DHCP. If the DVR’s NETWORK TYPE is set the LAN, input the following information in the DVR; IP Address, Subnet Mask, and Default Gateway. Open your web browser. Enter the router IP address in the address bar and press enter. (NOTE: The routers gateway will vary depending on the brand and model of the router, please refer to your routers user’s manual) 4.
6. Enter the each field. i. Application: Enter a description of the DVR (Example: store1) ii. Start: Enter the first number of the port you need to port forward (Example: 5445) iii. End: Enter the last number of the port you need to port forward (Example: 5445) iv. Protocol: Select Both. v. IP address: Enter the IP address of the DVR on SETUP>NETWORK>LAN>IP ADDRESS. vi. Enable: Check the enable box. 7. Select the Save settings button located on the bottom of the window.
1. Run the pre‐install the network client software on the supplied CD. 2. Check the IP address from SETUP>SYSTEM>DESCRIPTION of DVR. 3. Run network client software and click 106 | P a g e button.
4. Input Site Name, Site Address (IP address), Port No., and Password on the connect window. o Site Name: Input a name that properly describes a site. o IP Address: Input IP address (Public IP address of a router that DVR is connected.) or Domain name that is registered at www.ddnscenter.com 5. o Port No.: Input port number of DVR. Default Port Number is “5445”. o ID: Input ID of DVR. Default ID is “admin”. o Password: Input network password of DVR. Default Password is “1111”.
Internet Connection Using DDNS Connect an Ethernet cable (10BASE‐T/100BASE‐TX CAT 5 LAN Cable) from the system to a router (hub) 1. Go to SETUP>NETWORK. Set NETWORK TYPE as DHCP or LAN and set the DDNS SERVER to ON. And select ddnscenter.com on DDNS1. (If a different DDNS server is selected, the DVR will not communicate with the DDNS server) 2. Open the TCP port 5445 and the Web Port 80 in the router. (Refer to A. How to set IP address of the DVR and open TCP port of the router?) 3.
Domain Name: Input Domain Name for your DVR system (NOTE: Letters A‐Z, numbers 0‐9 are only applicable. Do not enter symbols or spaces) 5. Click the DUPLICATION CHECK button to see if the domain name is available. 6. If you see the screen “You can use the Domain name you entered” then click RETURN and click REGISTER button to complete the registration. 7. Run the pre‐install the network client software on the supplied CD. 8. Click SITE ADDITION button to add the DVR.
User’s Guide (Ver. 6.2) Analog DVR: H4, H8, H16 HD‐SDI DVR: HD204, HD408 High Definition H.264 Digital Video Recorder About This User’s Guide Before operating the unit, please read this user’s guide thoroughly and retain it for future reference.
