Installation Guide

---Attach the fixture grounding wire (usually green insulation or bare wire) to the mounting plate with the
green grounding screw, and then connect it to the house grounding wire with the wire connector.
Carefully put the wires back into the outlet box.
4. Attach the pan to the mounting strap by inserting two ball nuts and rotate the pan until it locks in place.
Then secure the ball nuts tightly.
5. Screw the nipple into the coupling and secure it tightly.
6. Install bulbs (not included). Check relamping label at socket area or packaging for maximun
allowed wattage.
7. Attach the glass shade to the pan by inserting the nipple, then secure it with a metal pad and hex nut.
Then carefully attach the cap to the glass shade and secure it.
Turn on the power at fuse or circuit box
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Mounting Strap(A) Fixture Mounting Green Grounding Mounting Screw (D)
Screw (B) Screw (C) Wire Connector (E) 5974MM (1 SET)
Lock Nut (G)
Ball Nut (F) Hex Nut (J)
Glass Shade
10024CT (1PC)
A: 15"
B: 6-1/4"
20181108
Nipple (H)
Metal Pad (I)
Cap (K)
Assembly Kit