Installation Guide

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local
electrical codes for wiring and grounding
requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
C0130
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
160926
Turn off the power at fuse or circuit box
Installation Steps
Hardware Package (included):
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Hex Nut (F)
Wire Nut (D)
Canopy (H)
Top Loop (I)
Collar (J)
Threaded Pipe (E)
Washer (G)
Loop Lock (K)
Chain (L)
Outlet Box
House Grounding Wire
Wire Nut(D)
Fixture Wire
Fixture Grounding Wire
Mounting Strap(A)
Green Grounding Screw(C)
Mounting Screw(B)
Threaded Pipe (E)
Canopy(H)
Top Loop(I)
Hex Nut(F)
Washer(G)
Collar(J)
Loop Lock(K)
Loop Lock(K)
Chain(L)
Loop
Fixture Canopy
1. Remove contents of hardware package marked
“For Pendant”.
2. Attach the threaded pipe to the mounting strap, and
then secure it with a washer and a hex nut.
3. Attach the mounting strap to the outlet box by using
two mounting screws.
4. Secure the top loop to the threaded pipe.
5. Secure the loop onto fixture canopy, thread fixture
wires through threaded end of loop first.
Tube (I)
Hex Nut (M)
Tube Cover (J)
Decorative Cup (N)
Washer (K)
Finial (O)
Threaded Pipe (H)
Metal Pad (L)
Cap (P)
For Pendant
Arm
Bulb Type A
Max. 100W(not included)
Hex Nut
Washer (K)
Coupling
Socket
Fixture body
Threaded Pipe(H)
Hex Nut
Tube(I)
Tube Cover(J)
Glass Shade
Cap (P)
Metal Pad(L)
Hex Nut(M)
Decorative Cup (N)
Finial (O)
Tube Cover