Installation Guide

Fig.1
Assembly Screw
Keyhole Slot
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
C0045
Pan
Socket
Coupling
Washer (G)
Lock Nut (F)
Nipple (H)
Interior Glass (J)
1. Attach the two assembly screws to the mounting strap, and screw in 2 to 3 turns.
2. Attach the mounting strap to the outlet box using two mounting screws.
3. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections
using the wire nuts:
---The black (hot) wires from the fixture to the black (hot) wire from the power source.
---The white (neutral) wires from the fixture to the white (neutral) wire from the power source.
---Attach the fixture grounding wire to the mounting strap with the green grounding screw. Then
connect it to the house grounding wire with the wire nut.
Carefully put the wires back into the outlet box.
4. Attach the pan to the mounting strap by inserting two assembly screw heads into the key holes, and
rotate the pan until it locks in place. Then secure the screws tightly. (See Fig.1)
Bulb Type A Max. 60W
(not included)
Finial (I)
Interior Glass (J)
Lock Nut (F)
Washer (G)
Nipple(H)
Parts:
Parts Number (4801MM)
Mounting Screw (B)
Green Grounding
Screw (C)
Wire Nut (E)
Mounting Strap (A)
Assembly Screw (D)
Finial (I)
Parts Number (9468FO)
130708
Parts Number (4801AA)
Parts Number (9468W)
Exterior Glass (K)
Mounting Screw (B)
Assembly Screw (D)
Fixture Grounding Wire
Outlet Box
House Grounding Wire
Wire Nut (E)
Mounting Strap (A)
Green Grounding Screw (C)